Details

---

MULTIPROCESS WELDERS

Model: Multimatic 235 (Machine Only)

The Miller® Multimatic® 235 is a 235 amp, portable multi-process welder that is capable of MIG, Flux-cored, DC stick, DC Lift-Arc™ TIG and Pulsed TIG welding. It is the first-ever Miller welder that functions with any OPTIONAL Miller Spoolmatic® or Spoolmate™ spool gun. For Spoolmate 200 and all Spoolmatic models, Auto-Gun Detect® automatically detects which gun (MIG or Spool) is being used and allows you to switch between MIG gun and spool gun by simply pulling the trigger. Spoolmate 100 and Spoolmate 150 spool guns can also be used with the Multimatic 235, but the Auto-Gun Detect® feature will not work with these spool gun models. Both the Spoolmate 100 and 150 need to be plugged into the 235's MIG gun receptacle in order to function properly.

The Multimatic® 235 comes complete with full color 4.3 inch LCD screen with Auto-Set™ Elite technology. Auto-Set™ Elite sets MIG, Stick and DC TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. The 235 also features a built in program for stainless steel MIG welding that uses Argon 98%/CO2 2% as the shielding gas. This will save hundreds of dollars per cylinder over using helium mix shielding gases for your stainless steel MIG applications.

The Multimatic® 235 runs on 240V single-phase input power. It comes complete with MDX™-250 MIG gun, electrode holder, clamp, flow gauge regulator and gas hose, reversible drive rolls, extra contact tips and material thickness gauge. TIG welding kit is sold separately.

FEATURES

• Multiprocess capabilities include MIG, flux cored, DC stick and DC Lift-Arc™ TIG welding. The Multimatic 235 also has pulsing capability that allows it to do pulsed TIG welding.
• Intuitive color LCD user interface makes it quick and easy to adjust parameters.
• Auto-Set Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
  Available for MIG, stick and DC TIG processes with the ability to fine-tune your settings.
  Set weld parameters by selecting:
  MIG - wire and gas type, wire diameter and material thickness
  Stick - electrode type, electrode diameter and material thickness
  DC Lift-Arc™ TIG (shown) - remote on/off, tungsten diameter and material thickness
• Wide range of TIG adjustability
  DC Pulse - adjustable from Off-150 pulses per second (PPS)
  TIG Post-Flow - adjustable from Auto-25 seconds (accessible through service menu screen 13)
  DC Lift-Arc™
  Tungsten size selection

---

 

Multimatic® 235 Multiprocess Welder - 240V
Weld Amperage Range	20 A - 235 A
Material Thickness	Mild Steel 24 ga. - 3/8 in. (TIG) Mild Steel 24 ga. - 3/8 in. (MIG) Mild Steel 16 ga. - 3/8 in. (Stick) Aluminum 18 ga. - 3/8 in (MIG)
Weldable Metals	Aluminum, Stainless Steel, Steel
Input Voltage	208 V 220/230/240 V
Input Phase	1-Phase
Input Hz	50/60 Hz
Current Type	DC
Max Open Circuit Voltage	54 VDC
Wire Feed Speed	1.5 m/min - 15.2 m/min 60 m/min - 600 m/min
Rated Output	CV: MIG/Flux 170 Amps at 22.5 V, 60% duty cycle CC: Stick 150 Amps at 26 V, 60% duty cycle CC: DC TIG 180 Amps at 17.2 V, 60% duty cycle
Welding Mode	CC/CV
Portability	Handle(s) Running Gear Cart (Optional)
Weld Output	CC / CV
Applications	Aluminum Welding

 

---